Drillzilla

Drillzilla
Drillzilla
Participation Information
UK Series	Extreme 1
US Season	1
Team Information
Team	Silicon Valley Destruction Company
Team Members	David Hall Bruce Hall Chris Kallai
Robot Statistics
Weight	352lbs/160kg
Dimensions	43" x 38" x 7"/1.09 x 0.96 x 0.17m
Top Speed	40mph
Power	4 x electric motors
Weapons	Drill & steel jaws
Statistics correct as of its most recent show/competition appearance, or if not applicable, qualification attempt.

"It drills, it kills and it'll walk all over you."

— Bruce Hall

Drillzilla was a competitor robot that fought in the first season of Robot Wars: Extreme Warriors. It competed in various competitions throughout that season, winning the Annihilator and Tag Team Terror competitions, and finishing runner-up to Razer in The Second World Championship, which was also broadcast as part of the first series of Robot Wars Extreme. Drillzilla also competed in the first US Championship, but was eliminated in the first round by Panzer Mk 2.

Design

Drillzilla covered in decorative confetti

It was a low invertible, box-shaped robot with a drill on the back with three sharpened flutes and two steel cutting jaws on the front. However, these weapons were barely used, with the robot instead using its immense weight, speed and pushing power to win battles. Its name was a pun of Godzilla, the famous Japanese monster. The robot was a shufflebot - a very unique type of walkerbot which used sections (or "banks") of feet in line with each other made of eurothane rubber, rather than the legs used by traditional walkers, the only other examples being the last two incarnations of Ansgar and the Dutch robot Scarab. It was this mechanism that made the robot much faster than most walkers at 40 mph.

Controversy

Drillzilla and its team at the World Championships

Drillzilla was somewhat unpopular in the pits due to its shufflebot design, which many thought to be bending the rules as the design gave it the weight advantage of a walkerbot but much better speed and pushing power than regular walkers usually enjoy.

"I did dislike 'Drillzilla' (AKA 'The Ugly Vibrating Brick'), but not because they beat us. I was convinced - correctly, I think - that their shufflebot design was not good for the sport. The rulemakers agreed..."

— Aaron Joerger

Shortly after Extreme Warriors was filmed, an amendment that affected Drillzilla was made to the walkerbot rules. It stated that a robot using a camshaft to "shuffle" as a means of locomotion no longer constituted walking. Shufflebots like Drillzilla were now limited to one-and-half times the normal weight limit. This ruling was made after Son Of Whyachi, a robot with a similar shufflebot design like Drillzilla, won the heavyweight tournament of BattleBots. As a result, Drillzilla did not return for the second season of Extreme Warriors, but David Hall entered the BattleBots championship with Dreadbot: a modified version of Drillzilla, which competed in the Superheavyweight division.

Robot History

Season 1

Red Virus and Drillzilla choose their targets

Drillzilla drives under Conquering Clown

Drillzilla's largely successful Season 1 campaign began with the Annihilator, where it competed against Skullmania, Conquering Clown, Red Virus, Unibite and Rippa Raptor. Drillzilla spent most of the first round battle pushing Conquering Clown around the arena, before getting underneath it but failing to turn Conquering Clown over. Drillzilla rammed Conquering Clown onto the Flame Pit, though its opponent did not catch fire. Ultimately, Skullmania was immobilised by an attack from Unibite, and Drillzilla qualified.

"I think I've found the kid who hated clowns!"

— Rebecca Grant to Drillzilla's team

Unibite breaks down after contact with Drillzilla

In the second round Drillzilla continued its attacks on Conquering Clown, which the team called the most 'inviting target'. Ultimately however, Drillzilla would instead immobilize Unibite by ramming it into the nearby group of robots. Having defeated the large spinner, Drillzilla placed Unibite on the flame pit, safely reaching the next stage.

Drillzilla finally defeats Conquering Clown

In the third round, Drillzilla yet again focused its efforts on Conquering Clown, but was pushed into the arena wall by Conquering Clown. Drillzilla slammed into Rippa Raptor, but continued to pursue Conquering Clown, shoving it towards Shunt and around the arena again until it became immobilized. Drillzilla finally pushed Conquering Clown onto the Flame Pit, where its body was left to burn and melt away.

"Well, every party needs some clown to do the barbecue."

— Stefan Frank

Drillzilla saves Rippa Raptor

Drillzilla slams Red Virus into the angle grinders

With Conquering Clown eliminated, Drillzilla was left to fight Red Virus and Rippa Raptor in the fourth round. Drillzilla admitted to forming an alliance with Rippa Raptor, as they would later enter the Tag Team Terror alongside Team Raptor. Indeed, when Rippa Raptor was being pressured by Red Virus, Drillzilla intercepted and pushed Red Virus, into the CPZ. After the trio separated themselves, Drillzilla pushed Red Virus into the flywheel of Matilda, but despite Red Virus escaping, Drillzilla attacked Red Virus again, this time slamming it onto an angle grinder. After more pushing, Drillzilla eventually ground Red Virus to a halt, allowing it to reach the final.

"What a beating, what good tactics!"

— Stefan Frank admires Drillzilla's control

Drillzilla wins its first title

There in the final, the allied Drillzilla and Rippa Raptor faced off, and Drillzilla's team threatened to immobilize their opponent within a minute, a claim which ultimately proved to be correct Drillzilla battered Rippa Raptor into submission against the side wall as soon as 'activate' was called, and followed this up with attack after attack. The first two attacks had already immobilized Rippa Raptor, allowing it to cruise around the arena as the Extreme Warriors Annihilator champion.

Drillzilla overpowers Tricerabot

Drillzilla pushes Tricerabot into the pit

Drillzilla also competed in the Tag Team Terror competition, partnered with Tut Tut. They faced Rosie the Riveter and Tricerabot in the eliminator battle. Tut Tut started the battle along with Tricerabot, tentatively bumping into each other before Tut Tut tagged to bring Drillzilla into play. Drillzilla and Tricerabot tussled over the flame pit, setting the extras attached to Tricerabot on fire. Drillzilla attacked Rosie the Riveter, which allowed Matilda to skim its armour with the flywheel. Drillzilla pushed Tricerabot into the pit just before time ran out, giving Drillzilla and Tut Tut the win.

Drillzilla disposes of General Chompsalot

In the final, Drillzilla and Tut Tut faced Run Away and General Chompsalot. Drillzilla was immediately on the aggressive, slamming into the side of Run Away. It relentlessly pushed Run Away around the arena, into Shunt, then towards Seargeant Bash, who gripped the machinery of Run Away and nudged it into the pit trigger. Both Drillzilla and Run Away tagged to bring their partners into play, albeit briefly, as Drillzilla came back out to push General Chompsalot into the pit. Run Away was flipped onto its side by the pyramid wedge of Tut Tut, giving Drillzilla and Tut Tut the Tag Team Terror title.

"Drillzilla, that was beautiful!"

— Stefan Frank as it pitted General Chompsalot

In the US Championship, Drillzilla immediately teamed up with Panzer Mk 2 to slam Spartacus into the arena wall. A second attack flipped Spartacus onto its side in a CPZ. It charged at Run Away hard enough to visibly damage its flimsy wedge, before pushing Spartacus and General Chompaslot across the arena at the same time. Run Away was the target for the next Drillzilla onslaught, being swept into another CPZ. Drillzilla then gathered Panzer Mk 2, General Chompsalot and Spartacus and pushed them across the arena floor, almost setting up Panzer Mk 2 for an out of the arena flip on Spartacus. Drillzilla rounded off the bout with more assaults on General Chompsalot and Panzer Mk 2. All six robots survived for the judges' decision, but despite all the aggression from Drillzilla, Panzer Mk 2 was awarded the victory.

Second World Championship

"Like typical American tourists, they're all a bit overweight!"

— Alex Mordue takes a jab at Drillzilla's team

Drillzilla pushes Firestorm into the pit release tyre in Round 1 of the Second World Championship.

Drillzilla continues to press Firestorm

Finally, Drillzilla represented the United States in the World Championship after semi-finalist The Brute withdrew. This competition was also broadcast during Robot Wars Extreme: Series 1. It fought Whirlpool 70, Firestorm 3 and NEAT Machine in the heats. Drillzilla charged straight at Whirlpool 70, but Firestorm breached the ground clearance of Drillzilla, though it couldn't flip it over. Whirlpool 70 was slammed into the CPZ by Drillzilla and the Swedish entry didn't escape the claws of Sir Killalot. Drillzilla pushed NEAT Machine onto the flipper of Firestorm, and after being overturned, couldn't self right. Drillzilla spent the rest of the battle pushing the rear end of Firestorm across the arena, and the judges' decision was awarded to Drillzilla.

"It's push and shove - heave ho and back we go"

— Jonathan Pearce describes the semi-final

Drillzilla and Manta push each other

Drillzilla pits Manta to reach the World Championship Final.

The semi final opponent was fellow US representative Manta. Drillzilla chased Manta and shoved it into a CPZ, but Manta pushed back, putting Manta into another CPZ. Manta activated the pit, however it was Drillzilla who successfully gathered its opponent up to force Manta down.

"You've got Razer scared, which doesn't happen a lot in the UK!"

— Julia Reed on the World Championship Final draw

Drillzilla is caught by Razer

Razer damages the shuffling banks of Drillzilla

Drillzilla is crushed by Razer and Sir Killalot

Drillzilla had qualified for the World Championship final against reigning world champion Razer. Razer almost immediately grabbed hold of Drillzilla and pushed it into the pincer of Sergeant Bash, but neither crushing weapon could make a significant impression on Drillzilla's shell. Razer tried crushing the shuffling mechanism of Drilzilla, but to no avail. Drillzilla was driven into Sir Killalot, but again, the opponent and house robot's claw could not crush through Drillzilla's tough armour. Drillzila temporarily escaped, but Razer grabbed hold of the United States competitor once again. Time ran out, and the judges' decision went against Drillzilla.

"Our strategy was to try and get around behind him, around the side, I think if we had done that even once, we could've had our way and pushed him all around the ring - they made sure that never happened"

— David Hall

Results

Wins/Losses

• Wins: 9
• Losses: 2

Series Record

US Series	Drillzilla Series Record
Season 1	Heat (Round 1)
Season 2	Did not enter
Nickelodeon	Did not enter

Outside Robot Wars

• The original Dreadbot
• The second Dreadbot (minus its claws)
• Dreadbot's third incarnation
• The first Nemesis
• The second Nemesis/Da Claw
• BuddleStomper
• LocoMotion

1/7

Drillzilla was originally a box on wheels with a spike on the front, which was entered into Seasons 2.0 of BattleBots under the name of Dreadbot before the shuffling model that entered Season 3.0-5.0 of BattleBots was built. It lost its first battle in each of its first two appearances and won two battles before losing in each of its next two appearances. When Drillzilla left Robot Wars, it had a new set of weapons, including some custom made saws, which were used on the BattleBots Season 5.0 incarnation of the robot. The team also entered Drillzilla in Robotica Season 3.0 as Da Claw. Drillzilla's team also entered BattleBots Seasons 3.0 to 5.0 with lightweight LocoMotion (previously known as BuddleStomper) and middleweight Nemesis, the latter used Da Claw's weapon as a Heavyweight in Season 4.0. Nemesis became a middleweight once again in Season 5.0 after Da Claw's weaponry was removed.