Robot Wars Wiki
Robot Wars Wiki
(Cit template is better than removing when it's something so believable)
(29 intermediate revisions by 17 users not shown)
Line 2: Line 2:
 
|robot_name=Forklift's Revenge
 
|robot_name=Forklift's Revenge
 
|image=[[File:Forklift's_revenge.JPG|200px]]
 
|image=[[File:Forklift's_revenge.JPG|200px]]
|caption=Forklift's Revenge
 
 
|series=3
 
|series=3
 
|team_members=John Benton<br/>Bob Benton<br/>Andrew Shorter
 
|team_members=John Benton<br/>Bob Benton<br/>Andrew Shorter
 
|other_entries=[[Forklift]]<br/><small>(Series 2)</small>
 
|other_entries=[[Forklift]]<br/><small>(Series 2)</small>
  +
|from=Ipswich
  +
|stats=Forklifts revenge stats.png
 
|weight=77.2kg
 
|weight=77.2kg
 
|dimensions=0.55m x 0.94m x 0.65m
 
|dimensions=0.55m x 0.94m x 0.65m
 
|clearance=5mm
 
|clearance=5mm
|power=4 x wheelchair motors
+
|drive=120w wheelchair motors
 
|weapons=Toothed chain drive
 
|weapons=Toothed chain drive
 
}}
 
}}
  +
{{quote|I have been playing with this robot in the garden, and its a bit of a beast. The spiked chain will pick up all kinds of large household appliances.|The team on testing Forklift's Revenge<ref>http://web.archive.org/web/20020822164148/http://homepages.anglianet.co.uk/benton/rwars/fork2.html</ref>}}
'''Forklift's Revenge''' was an indigo wedge-shaped robot that competed in Series 3 of ''[[Robot Wars]]''. It was a sequel to Reserve Robot [[Forklift]].
+
'''Forklift's Revenge''' was a wedge-shaped robot which competed in Series 3 of ''[[Robot Wars]]'', falling in the first round to [[Suicidal Tendencies]] after being pitted by [[Sir Killalot]]. It was the successor to Series 2 [[Substitute Robots|reserve]] robot [[Forklift]].
   
  +
==Design==
The robot was made from a welded steel tube body frame, and had MDF and steel panels. Forklift's Revenge featured wedge shaped forks made from industrial shelving for attacking low ground clearances, but its main weapons were two chains that ran up the wedge. These chains were toothed, so that they could hook other robots and drag them over its body. However, it was unable to use these to good effect against its only opponent [[Suicidal Tendencies]], and was dumped down the pit - the second robot in its heat to suffer that fate.
 
  +
{{quote|We used the basic chassis from forklift (its the bit I spent the most time on, and wasn't kept together with cable ties) but removed the fork runners, and extended the subframe, so that we could attach the armour plated directly to it, rather than the silly clamshell design we had last time|The Forklift website on building Forklift's Revenge<ref>http://web.archive.org/web/20020822164148/http://homepages.anglianet.co.uk/benton/rwars/fork2.html</ref>}}
 
[[File:Forklift's revenge team.JPG|thumb|left|The team, with another side of Forklift's Revenge]]
 
The robot was made from a welded steel tube body frame, and had MDF and steel panels. Forklift's Revenge featured wedge shaped forks made from industrial shelving for attacking low ground clearances, but its main weapons were two chains that ran up the wedge. These chains were toothed, so that they could hook other robots and drag them over its body. However, it was unable to use these to good effect against its only opponent Suicidal Tendencies. The Forklift's Revenge website claims it ran on two 120w wheelchair motors (on a 70A speed controller)<ref>http://web.archive.org/web/20020822164148/http://homepages.anglianet.co.uk/benton/rwars/fork2.html</ref>, whilst the TV show claimed it ran on four wheelchair motors.
  +
{{quote|The control systems were shrunk to a quarter of the size, and tidied up. We kept the old microswitch setup, so that we had backup if the speed controllers failed. With this setup, we could loose both speed controllers (weapon+drive) and still have a functioning robot (change to switched drive, and run the weapon continously)|The Forklift's Revenge website<ref>http://web.archive.org/web/20020822164148/http://homepages.anglianet.co.uk/benton/rwars/fork2.html</ref>}}
  +
  +
==Qualification==
  +
{{quote|We still have yet to hear from Mentorn after the auditions.... 360 robots this year, and dispite a vastly improved robot, I have no idea how we will do.|The team on the auditions process<ref>http://web.archive.org/web/20020822164148/http://homepages.anglianet.co.uk/benton/rwars/fork2.html</ref>}}
  +
Forklift's Revenge attended the auditions for Series 3, and the team did not initially hear back from Mentorn on whether or not they had qualified, but it was later confirmed that Forklift's Revenge had qualified.
   
 
==Robot History==
 
==Robot History==
 
===Series 3===
 
===Series 3===
  +
Forklift's Revenge competed in Heat A of Series 3, where it faced [[Suicidal Tendencies]].
Suicidal Tendencies was Forklift's Revenge's opponent. The two robots imediately slammed into each other in the middle of the arena and Suicidal Tendencies drove right on top of Forklift's Revenge's wedge, but got away. It then drove behind Forklift's Revenge and slammed into it, breaking some of its teeth off. Forklift's Revenge then ripped part of the Arena Flipper sticker off with its forks. Suicidal Tendencies pushed Forklift's Revenge towards the flame pit and into Sir Killalot's Corner Patrol Zone. Killalot slipped his drill lance inside the chain of Forklift's Revenge's, allowing it to flourish in midair.
 
  +
[[File:Forklift's revenge suicidal tendencies.JPG|thumb|left|Forklift's Revenge is pushed by Suicidal Tendencies]]
{{quote|This is a mere bauble - a toy - for Sir Killalot|Jonathan Pearce as Killalot carries Forklift's Revenge}}
 
  +
[[File:Sir killalot and forklift's revenge.JPG|thumb|Sir Killalot skewers Forklift's Revenge]]
Sir Killalot took Forklift's Revenge over to the pit, dropping it in.
 
 
The two robots immediately slammed into each other in the middle of the arena and Suicidal Tendencies drove right on top of Forklift's Revenge's wedge, but got away. It then drove behind Forklift's Revenge and slammed into it, breaking some of its teeth off. Forklift's Revenge then ripped part of the Arena Flipper chevron tape off with its forks. Suicidal Tendencies pushed Forklift's Revenge towards the flame pit and into Sir Killalot's Corner Patrol Zone. Sir Killalot hooked its drill lance onto Forklift's Revenge's chains, allowing it to flourish in mid-air, holding it up and rolling it over in midair several times, at one point slamming it onto the ground, but picking it up again.
  +
[[File:Killalot forklift's revenge pit.JPG|thumb|Sir Killalot disposes of Forklift's Revenge]]
 
{{quote|This is a mere bauble - a toy - for Killalot - that's rather gruesome, all those weeks' works coming to naught, coming to a gruesome end...|Jonathan Pearce as Sir Killalot carries Forklift's Revenge}}
  +
Sir Killalot took Forklift's Revenge over to the pit, dropping it in. This eliminated Forklift's Revenge from the competition, despite only entering the CPZ before being defeated outright.
   
 
==Results==
 
==Results==
Line 26: Line 40:
 
{{Show|Series 3}}
 
{{Show|Series 3}}
 
{{Competition|The Third Wars- UK Championship|Heat, Round 1}}
 
{{Competition|The Third Wars- UK Championship|Heat, Round 1}}
{{Battle|[[Robot Wars: The Third Wars/Heat A|Heat A]], Round 1|[[Suicidal Tendencies]]|Lost}}
+
{{Battle|[[Robot Wars: The Third Wars/Heat A|Heat A, Round 1]]|[[Suicidal Tendencies]]|Lost}}
 
|}
 
|}
   
 
===Wins/Losses===
 
===Wins/Losses===
[[File:Forklift's revenge team.JPG|thumb|The team, with another side of Forklift's Revenge]]
 
 
*Wins: 0
 
*Wins: 0
 
*Losses: 1
 
*Losses: 1
   
 
==Series Record==
 
==Series Record==
  +
[[File:Forklift_revenge_design.gif|thumb|Concept design of Forklift's Revenge]]
*Series 1: Did not enter
 
*Series 2: Entered the [[Reserve Rumble]] with [[Forklift]]
+
{{Series Record|Forklift's Revenge|Did not enter|[[Robot Wars: The Second Wars/Reserve Rumble|Reserve Rumble]] with [[Forklift]]|'''Heat, Round 1'''}}
*Series 3: Heat, Round 1
 
*Series 4-7: Did not enter
 
   
 
==Trivia==
 
==Trivia==
  +
[[File:Forkliftrevenge s3 official.png|thumb|150px|Official Series 3 photo]]
 
*During its battle with Suicidal Tendencies, Forklift's Revenge's wedges pulled free a piece of tape that marked the area of the arena floor flipper.
 
*During its battle with Suicidal Tendencies, Forklift's Revenge's wedges pulled free a piece of tape that marked the area of the arena floor flipper.
  +
*The weapon drive motors were originally the main drive motors from the robot [[Pain]] that competed in Series 2{{cit}}.
  +
*Team member Bob Benton used to collect tumble dryer doors in his garage.
  +
  +
== External Links ==
  +
*[http://web.archive.org/web/20020815090524/http://homepages.anglianet.co.uk:80/benton/rwars/ Forklift's Website (Archived)]
  +
  +
==References==
  +
<references/>
   
  +
{{Series 3 Competitors}}
 
[[Category:UK Series competitors]]
 
[[Category:UK Series competitors]]
[[Category:One-time Losers]]
 
[[Category:Robots that debuted in Series 3]]
 
 
[[Category:Robots from Suffolk]]
 
[[Category:Robots from Suffolk]]
 
[[Category:Robots with Conveyor Belts]]
 
[[Category:Robots with Conveyor Belts]]
  +
[[Category:Robots which lost their only battle]]
 
[[Category:Robots which debuted in Series 3]]
  +
[[Category:Robots which only fought in Series 3]]
  +
[[Category:Robots with cameo appearances in Series 4]]
  +
[[Category:Robots to damage the Arena]]
  +
[[Category:Robots with cameo appearances in Extreme Warriors Season 1]]

Revision as of 19:41, 6 June 2020

"I have been playing with this robot in the garden, and its a bit of a beast. The spiked chain will pick up all kinds of large household appliances."
— The team on testing Forklift's Revenge[1]

Forklift's Revenge was a wedge-shaped robot which competed in Series 3 of Robot Wars, falling in the first round to Suicidal Tendencies after being pitted by Sir Killalot. It was the successor to Series 2 reserve robot Forklift.

Design

"We used the basic chassis from forklift (its the bit I spent the most time on, and wasn't kept together with cable ties) but removed the fork runners, and extended the subframe, so that we could attach the armour plated directly to it, rather than the silly clamshell design we had last time"
— The Forklift website on building Forklift's Revenge[2]
Forklift's revenge team

The team, with another side of Forklift's Revenge

The robot was made from a welded steel tube body frame, and had MDF and steel panels. Forklift's Revenge featured wedge shaped forks made from industrial shelving for attacking low ground clearances, but its main weapons were two chains that ran up the wedge. These chains were toothed, so that they could hook other robots and drag them over its body. However, it was unable to use these to good effect against its only opponent Suicidal Tendencies. The Forklift's Revenge website claims it ran on two 120w wheelchair motors (on a 70A speed controller)[3], whilst the TV show claimed it ran on four wheelchair motors.

"The control systems were shrunk to a quarter of the size, and tidied up. We kept the old microswitch setup, so that we had backup if the speed controllers failed. With this setup, we could loose both speed controllers (weapon+drive) and still have a functioning robot (change to switched drive, and run the weapon continously)"
— The Forklift's Revenge website[4]

Qualification

"We still have yet to hear from Mentorn after the auditions.... 360 robots this year, and dispite a vastly improved robot, I have no idea how we will do."
— The team on the auditions process[5]

Forklift's Revenge attended the auditions for Series 3, and the team did not initially hear back from Mentorn on whether or not they had qualified, but it was later confirmed that Forklift's Revenge had qualified.

Robot History

Series 3

Forklift's Revenge competed in Heat A of Series 3, where it faced Suicidal Tendencies.

Forklift's revenge suicidal tendencies

Forklift's Revenge is pushed by Suicidal Tendencies

Sir killalot and forklift's revenge

Sir Killalot skewers Forklift's Revenge

The two robots immediately slammed into each other in the middle of the arena and Suicidal Tendencies drove right on top of Forklift's Revenge's wedge, but got away. It then drove behind Forklift's Revenge and slammed into it, breaking some of its teeth off. Forklift's Revenge then ripped part of the Arena Flipper chevron tape off with its forks. Suicidal Tendencies pushed Forklift's Revenge towards the flame pit and into Sir Killalot's Corner Patrol Zone. Sir Killalot hooked its drill lance onto Forklift's Revenge's chains, allowing it to flourish in mid-air, holding it up and rolling it over in midair several times, at one point slamming it onto the ground, but picking it up again.

Killalot forklift's revenge pit

Sir Killalot disposes of Forklift's Revenge

"This is a mere bauble - a toy - for Killalot - that's rather gruesome, all those weeks' works coming to naught, coming to a gruesome end..."
— Jonathan Pearce as Sir Killalot carries Forklift's Revenge

Sir Killalot took Forklift's Revenge over to the pit, dropping it in. This eliminated Forklift's Revenge from the competition, despite only entering the CPZ before being defeated outright.

Results

FORKLIFT'S REVENGE - RESULTS
Series 3
The Third Wars- UK Championship
Heat, Round 1
Heat A, Round 1 vs. Suicidal Tendencies Lost

Wins/Losses

  • Wins: 0
  • Losses: 1

Series Record

Forklift revenge design

Concept design of Forklift's Revenge

Series Forklift's Revenge Series Record
The First Wars Did not enter
The Second Wars Reserve Rumble with Forklift
The Third Wars Heat, Round 1
The Fourth Wars Did not enter
The Fifth Wars Did not enter
The Sixth Wars Did not enter
The Seventh Wars Did not enter
Series 8 Did not enter
Series 9 Did not enter
Series 10 Did not enter

Trivia

Forkliftrevenge s3 official

Official Series 3 photo

  • During its battle with Suicidal Tendencies, Forklift's Revenge's wedges pulled free a piece of tape that marked the area of the arena floor flipper.
  • The weapon drive motors were originally the main drive motors from the robot Pain that competed in Series 2Citation?

.

  • Team member Bob Benton used to collect tumble dryer doors in his garage.

External Links

References