Changes: Kill-E-Crank-E

Revision as of 10:52, 15 September 2019

"Kill-E-Crank-E is a two-wheeled robot with a powerful 8.5 kg vertical spinning disc in the centre, which spins at 450 rpm (about the same rate as a typical helicopter blade)."

— The Robot Wars website

Kill-E-Crank-E was a robot from the far north of Scotland that fought in Series 8 of Robot Wars. It was eliminated in its Group Battle after driving into the pit in the grasp of Razer: both fell in after Kill-E-Crank-E reversed its driving wheel, spinning both robots around at the corner of the pit.

Kill-E-Crank-E was succeeded by Crank-E, which competed in Series 9.

Design

"Kill-E-Crank-E's disc has three cobalt-edged bi-directional teeth. When attacking it brakes quickly when approaching its opponent, allowing momentum to flip it over to bring the spinner down forcefully in an arc on to its opponent."

— Robot Wars: Build Your Own Robot

Kill-E-Crank-E Disc — Kill-E-Crank-E's disc

Kill-E-Crank-E bears a similar design to Series 5-6 Semi-Finalist S3, being a wide, tubular, grey robot with exposed rubber tyre wheels at each side, and a 450rpm spinning disc at the front with three cobalt-edged teeth. Unlike S3, Kill-E-Crank-E features a concave section which extends out of the robot's front, creating a 'crank' shape. The robot was originally intended to be V-shaped, but had to adopt the 'crank' shape over the build process to accommodate its internal components. When Kill-E-Crank-E drives towards its opponent, the team can brake quickly, and the robot's momentum flips itself over, bringing the spinner down forcefully in an arc onto their opponent. The robot is constructed from an 8-inch pipe of 304-Grade stainless steel, provided by a local engineering company. The body is divided into two equal arms with an interchangeable weapon section in the middle, the three parts being bolted together at flanges.

Kill-E-Crank-E with team — Team Kill-E-Crank-E

Kill-E-Crank-E S8 — Kill-E-Crank-E enters the arena

The current alternative weapon for Kill-E-Crank-E is a heavy mild steel forked spike, which can replace the spinning disc mid-section. Although this was not used on the televised series, Kill-E-Crank-E is equipped with this weapon at live events, to cooperate with the rule concerning spinning weaponry. The spike weapon was drawn out in chalk on a sheet of 10mm thick plate a few days before filming to give the team another weapon option in case the spinner broke or an alternative weapon was preferred. The weapon was flame cut and welded just in time. Coating the rotating blade teeth with cobalt-chromium alloy Stellite was the idea of Nick Wells' dad, a metallurgist. The disc was able to spin in both directions with full speed control, so the teeth were sharp on both sides.

Kill-E-Crank-E's tyres were made battle-ready using Twaron material from the original Bodyhammer project.

Etymology

"The design started off as a V-shape but changed into a crank shape to accommmodate the mechanics. The name of the new robot, Kill-E-Crank-E, evolved from this shape, with the letter "E" added, short for electric, the word "kill" added to make it sound deadly, and then the whole thing being a homonym for the Highland town of Killiecrankie where a famous battle took place in 1689. There is even a song about it. Nothing to do with the Crankies."

— Robin Herrick^[1]

The name Kill-E-Crank-E references robot's distinctive 'crank' shape, and the word 'kill'. It is primarily derived from The Battle of Killiecrankie, which was fought between Highland Scottish clans supporting King James II and VII and troops supporting King William of Orange on 27 July 1689, during the first Jacobite uprising.

The Team

Kill-E-Crank-E Dara — The team are interviewed by Dara Ó Briain

Kill-E-Crank-E was built by 44-year old nuclear decommissioning engineer Robin Herrick, creator of original series Grand Finalists Bodyhammer and Pussycat, and the original captain of the Cold Fusion Team on Robot Wars before leaving the televised team ahead of Series 5. Kill-E-Crank-E's team consists of Robin Herrick as captain and builder, his 11-year old son Matthew Herrick as the weapons operator, Matthew's friend Isaac Potts, and Nick Wells.

Robot History

Series 8

Dara Ó Briain: "Is it named after the Krankies?"

Robin Herrick: "...No?"

Dara Ó Briain: "That's unfortunate, in my head that's all I can see now, Janette Krankie riding a robot into battle!"

— An unintentional coincidence

Kill-E-Crank-E competed in the first heat of the series against veterans Razer and Terrorhurtz along with newcomer Nuts.

Razer vs Kill-E-Crank-E — Kill-E-Crank-E is targeted by Razer

Kill-E-Crank-E vs Razer — Kill-E-Crank-E burns

Razer targeted Kill-E-Crank-E from the outset. However, Kill-E-Crank-E's low and wide shape proved awkward for Razer, whose beak best worked on chunky robots of medium height. With Razer's claw stuck on one of Nuts' minibots, Kill-E-Crank-E took the chance to push back, though did not get its disc into play. Razer bit down into the weapon opening of Kill-E-Crank-E but did no damage. Razer was able to control Kill-E-Crank-E throughout most of the battle by fitting the entire body pipe within its weapon's arc.

"I had no doubt that Kill-E-Crank-E had not done enough to go through to the next round on a judges decision, so I activated the pit release in the hopes that we could still win outright."

— Robin Herrick

Kill e crank e pit release — Kill-E-Crank-E presses the pit release

RazerKillEpit — Kill-E-Crank-E drags Razer into the pit

Kill-E-Crank-E managed to press the pit release button and the two robots struggled towards the pit, each trying to pit the other. Just as Razer pushed Kill-E-Crank-E towards the pit, the latter robot reversed on one wheel and spun both robots around. The result of this was that both robots fell into the pit, eliminating both from the competition.

"Razer clearly had it in for us so I thought let's go for a mutual death pact and take them down with us!"

— Robin Herrick

Results

KILL-E-CRANK-E - RESULTS
Series 8
Series 8 - UK Championship Round 1
Heat 1, Group Battle	vs. Nuts, Razer, Terrorhurtz	Eliminated

Wins/Losses

Wins: 0
Losses: 1

Series Record

Kill-E-Crank-E-APS 7450s — The team approach the arena

Series	Kill-E-Crank-E Series Record
The First Wars	Entered with Bodyhammer
The Second Wars	Entered with Bodyhammer
The Third Wars	Entered with Pussycat
The Fourth Wars	Entered with Pussycat
The Fifth Wars	Did not enter
The Sixth Wars	Did not enter
The Seventh Wars	Did not enter
Series 8	Heat, Round 1
Series 9	Entered with Crank-E
Series 10	Did not enter

NOTE: This refers to the performance record of Robin Herrick alone

Outside Robot Wars

In-between building Pussycat and Kill-E-Crank-E, Robin Herrick built a variety of robots, including a hydraulic petrol-powered walker with a large hammer. However, none of these robots competed at robotic events due to his relocation to Scotland, and the cancellation of the TV show.

Robot Wars Live Events

DSCN2719 — Kill-E Crank-E, equipped with its forked spike in Manchester

Kill-E-Crank-E travelled all the way from Scotland to appear at the first Robot Wars live event of 2016 in Manchester, using the spike in place of its spinning disc. Kill-E-Crank-E made a humorous debut, as the robot was so wide, it could not drive through the doorway, and needed to be lifted into the arena. Kill-E-Crank-E entered a four-way melee against Crushtacean, Meggamouse and Chimera. In the opening moments of the battle, the thin Kill-E-Crank-E was a perfect fit for Crushtacean’s own pincers, and was grabbed and dragged around for a period of the match. When freed by Crushtacean, Kill-E-Crank-E headed straight for the pit, getting caught over the edge. Chimera, in an attempt to finish off Kill-E-Crank-E, drove into the pit itself and freed the stranded machine, but Kill-E-Crank-E broke down shortly afterwards when a cable came loose.

Trivia

Kill-E-Crank-E was one of only four robots in Series 8 to not use modern lithium polymer or nickel metal hydride batteries inside the machine, the others being DisConstructor, Sweeney Todd and The General, which also used lead acid batteries.

References

↑ https://www.rr2h.uk/robot-wars?fbclid=IwAR2i7imy5vKdBjigKntXLSbMQU9UbQsQ5iU1SMTzdVAdjG8GZHb9PymkKDw

External Links

[1] ttps://www.rr2h.uk/robot-wars?fbclid=IwAR2i7imy5vKdBjigKntXLSbMQU9UbQsQ5iU1SMTzdVAdjG8GZHb9PymkKDw

[1]

@@ Line 7: / Line 7: @@
 |team          = [[Cold Fusion Team]]
 |team_members  = Robin Herrick<br/>Matthew Herrick<br/>Isaac Potts<br/>Nick Wells
+|from          = Caithness, Scotland
 |other_entries = [[Bodyhammer]]<br/> <small>(Series 1-2)</small><br>[[Pussycat]]<br/> <small>(Series 3-4)</small><br/>[[Crank-E]]<br/> <small>(Series 9)</small>
 |weight        = 108.7kg
 |dimensions    =
 |speed         = 9mph
-|power         = DC motors, with two-stage gearboxes
+|power         = Sealed lead-acid, 24v
+|drive         = DC motors, with two-stage gearboxes
 |weapons       = Vertical spinning disc
 }}
+{{quote|Kill-E-Crank-E is a two-wheeled robot with a powerful 8.5 kg vertical spinning disc in the centre, which spins at 450 rpm (about the same rate as a typical helicopter blade).|The ''Robot Wars'' website}}
-'''Kill-E-Crank-E''' is a robot from the far north of Scotland that fought in [[Robot Wars: Series 8|Series 8]] of ''[[Robot Wars]]''. It was eliminated in its Group Battle after driving into the pit in the grasp of [[Razer]]: both fell in after Kill-E-Crank-E reversed its driving wheel, spinning both robots around at the corner of the pit.
+'''Kill-E-Crank-E''' was a robot from the far north of Scotland that fought in [[Robot Wars: Series 8|Series 8]] of ''[[Robot Wars]]''. It was eliminated in its Group Battle after driving into the pit in the grasp of [[Razer]]: both fell in after Kill-E-Crank-E reversed its driving wheel, spinning both robots around at the corner of the pit.
-Kill-E-Crank-E was built by Robin Herrick, creator of original series Grand Finalists [[Bodyhammer]] and [[Pussycat]]. The robot's team consists of Herrick as captain and builder, his son Matthew Herrick, Matthew's friend Isaac Potts, and late entry Nick Wells. Kill-E-Crank-E was succeeded by [[Crank-E]], which competed in [[Robot Wars: Series 9|Series 9]].
+Kill-E-Crank-E was succeeded by [[Crank-E]], which competed in [[Robot Wars: Series 9|Series 9]].
-The name Kill-E-Crank-E is derived from the robot's distinctive 'crank' shape, as well as ''The Battle of Killiecrankie'', which was fought between Highland Scottish clans supporting King James II and VII and troops supporting King William of Orange on 27 July 1689, during the first Jacobite uprising.
 ==Design==
+{{quote|Kill-E-Crank-E's disc has three cobalt-edged bi-directional teeth. When attacking it brakes quickly when approaching its opponent, allowing momentum to flip it over to bring the spinner down forcefully in an arc on to its opponent.|[[Robot Wars: Build Your Own Robot]]}}
 [[File:Kill-E-Crank-E.jpg|thumb|left|Official shot of Kill-E-Crank-E]]
 [[File:Kill-E-Crank-E Disc.jpg|thumb|Kill-E-Crank-E's disc]]
-Kill-E-Crank-E bears a similar design to Series 5-6 Semi-Finalist [[S3]], being a wide, tubular, grey robot with exposed rubber-tyred wheels at each side, and a 450rpm spinning disc at the front with three cobalt-edged teeth. Unlike S3, Kill-E-Crank-E features a concave section which extends out of the robot's front, creating a 'crank' shape. The robot was originally intended to be V-shaped, but had to adopt the 'crank' shape over the build process to accommodate its internal components. When Kill-E-Crank-E drives towards its opponent, the team can brake quickly, and the robot's momentum flips itself over, bringing the spinner down forcefully in an arc onto their opponent. The robot is constructed from an 8-inch pipe of 304-Grade stainless steel, provided by a local engineering company. The body is divided into two equal arms with an interchangeable weapon section in the middle, the three parts being bolted together at flanges.
+Kill-E-Crank-E bears a similar design to Series 5-6 Semi-Finalist [[S3]], being a wide, tubular, grey robot with exposed rubber tyre wheels at each side, and a 450rpm spinning disc at the front with three cobalt-edged teeth. Unlike S3, Kill-E-Crank-E features a concave section which extends out of the robot's front, creating a 'crank' shape. The robot was originally intended to be V-shaped, but had to adopt the 'crank' shape over the build process to accommodate its internal components. When Kill-E-Crank-E drives towards its opponent, the team can brake quickly, and the robot's momentum flips itself over, bringing the spinner down forcefully in an arc onto their opponent. The robot is constructed from an 8-inch pipe of 304-Grade stainless steel, provided by a local engineering company. The body is divided into two equal arms with an interchangeable weapon section in the middle, the three parts being bolted together at flanges.
 [[File:Kill-E-Crank-E with team.jpg|thumb|left|Team Kill-E-Crank-E]]
-[[File:Kill-E-Crank-E-APS 7450s.jpg|thumb|The team approach the arena]]
+[[File:Kill-E-Crank-E S8.jpg|thumb|Kill-E-Crank-E enters the arena]]
-The current alternative weapon for Kill-E-Crank-E is a heavy mild steel forked spike, which can replace the spinning disc mid-section. Although this was not used on the televised series, Kill-E-Crank-E is equipped with this weapon at live events, to cooperate with the rule concerning spinning weaponry. The spike weapon was drawn out in chalk on a sheet of 10mm thick plate a few days before filming to give the team another weapon option in case the spinner broke or an alternative weapon was preferred. The weapon was flame cut and welded just in time. Coating the rotating blade teeth with cobalt-chromium alloy Stellite was the idea of Nick Wells' dad, a metalurgist. The disc was able to spin in both directions with full speed control, so the teeth were sharp on both sides.
+The current alternative weapon for Kill-E-Crank-E is a heavy mild steel forked spike, which can replace the spinning disc mid-section. Although this was not used on the televised series, Kill-E-Crank-E is equipped with this weapon at live events, to cooperate with the rule concerning spinning weaponry. The spike weapon was drawn out in chalk on a sheet of 10mm thick plate a few days before filming to give the team another weapon option in case the spinner broke or an alternative weapon was preferred. The weapon was flame cut and welded just in time. Coating the rotating blade teeth with cobalt-chromium alloy Stellite was the idea of Nick Wells' dad, a metallurgist. The disc was able to spin in both directions with full speed control, so the teeth were sharp on both sides.
 Kill-E-Crank-E's tyres were made battle-ready using Twaron material from the original Bodyhammer project.
+=== Etymology ===
+{{quote|The design started off as a V-shape but changed into a crank shape to accommmodate the mechanics. The name of the new robot, Kill-E-Crank-E, evolved from this shape, with the letter "E" added, short for electric, the word "kill" added to make it sound deadly, and then the whole thing being a homonym for the Highland town of Killiecrankie where a famous battle took place in 1689. There is even a song about it. Nothing to do with the Crankies.|Robin Herrick<ref>https://www.rr2h.uk/robot-wars?fbclid=IwAR2i7imy5vKdBjigKntXLSbMQU9UbQsQ5iU1SMTzdVAdjG8GZHb9PymkKDw</ref>}}
+The name Kill-E-Crank-E references robot's distinctive 'crank' shape, and the word 'kill'. It is primarily derived from ''The Battle of Killiecrankie'', which was fought between Highland Scottish clans supporting King James II and VII and troops supporting King William of Orange on 27 July 1689, during the first Jacobite uprising.
+==The Team==
+[[File:Kill-E-Crank-E_Dara.jpg|thumb||The team are interviewed by Dara Ó Briain]]
+Kill-E-Crank-E was built by 44-year old nuclear decommissioning engineer Robin Herrick, creator of original series Grand Finalists [[Bodyhammer]] and [[Pussycat]], and the original captain of the Cold Fusion Team on ''Robot Wars'' before leaving the televised team ahead of Series 5. Kill-E-Crank-E's team consists of Robin Herrick as captain and builder, his 11-year old son Matthew Herrick as the weapons operator, Matthew's friend Isaac Potts, and Nick Wells.
 ==Robot History==
 ===Series 8===
-{{dialogue a-b-a|[[Dara Ó Briain]]|Is it named after the Krankies?|Robin Herrick|...No?|That's unfortunate, in my head that's all I can see now, Janette Krankie riding into battle!|An unintentional coincidence}}
+{{dialogue a-b-a|[[Dara Ó Briain]]|Is it named after the Krankies?|Robin Herrick|...No?|That's unfortunate, in my head that's all I can see now, Janette Krankie riding a robot into battle!|An unintentional coincidence}}
+Kill-E-Crank-E competed in the first heat of the series against veterans [[Razer]] and [[Terrorhurtz]] along with newcomer [[Nuts]].
 [[File:Razer vs Kill-E-Crank-E.jpg|thumb|Kill-E-Crank-E is targeted by Razer]]
 [[File:Kill-E-Crank-E vs Razer.jpg|thumb|left|Kill-E-Crank-E burns]]
-Kill-E-Crank-E competed in the first episode of the series against veterans [[Razer]] and [[Terrorhurtz]] along with newcomer [[Nuts]]. Razer targeted Kill-E-Crank-E from the outset. However, Kill-E-Crank-E's low and wide shape proved awkward for Razer, whose beak best worked on chunky robots of medium height. With Razer's claw stuck on one of Nuts' minibots, Kill-E-Crank-E took the chance to push back, though did not get its disc into play. Razer bit down into the weapon opening of Kill-E-Crank-E but did no damage. Razer was able to control Kill-E-Crank-E throughout most of the battle by fitting the entire body pipe within its weapon's arc.
+Razer targeted Kill-E-Crank-E from the outset. However, Kill-E-Crank-E's low and wide shape proved awkward for Razer, whose beak best worked on chunky robots of medium height. With Razer's claw stuck on one of Nuts' minibots, Kill-E-Crank-E took the chance to push back, though did not get its disc into play. Razer bit down into the weapon opening of Kill-E-Crank-E but did no damage. Razer was able to control Kill-E-Crank-E throughout most of the battle by fitting the entire body pipe within its weapon's arc.
 {{quote|I had no doubt that Kill-E-Crank-E had not done enough to go through to the next round on a judges decision, so I activated the pit release in the hopes that we could still win outright.|Robin Herrick}}
-[[File:RazerKillEpit.jpg|thumb|left|Kill-E-Crank-E drags Razer into the pit]]
+[[File:Kill_e_crank_e_pit_release.png|thumb|left|Kill-E-Crank-E presses the pit release]]
+[[File:RazerKillEpit.jpg|thumb|Kill-E-Crank-E drags Razer into the pit]]
 Kill-E-Crank-E managed to press the pit release button and the two robots struggled towards the pit, each trying to pit the other. Just as Razer pushed Kill-E-Crank-E towards the pit, the latter robot reversed on one wheel and spun both robots around. The result of this was that both robots fell into the pit, eliminating both from the competition.
@@ Line 46: / Line 58: @@
 {{Show|Series 8}}
 {{Competition|Series 8 - UK Championship|Round 1}}
-{{Battle|[[Robot Wars: Series 8/Episode 1|Episode 1, Group Battle]]|[[Nuts]], [[Razer]], [[Terrorhurtz]]|Eliminated}}
+{{Battle|[[Robot Wars: Series 8/Heat 1|Heat 1, Group Battle]]|[[Nuts]], [[Razer]], [[Terrorhurtz]]|Eliminated}}
 |}
@@ Line 54: / Line 66: @@
 ==Series Record==
+[[File:Kill-E-Crank-E-APS 7450s.jpg|thumb|The team approach the arena]]
 {{Series Record|Kill-E-Crank-E|Entered with [[Bodyhammer]]|Entered with [[Bodyhammer]]|Entered with [[Pussycat]]|Entered with [[Pussycat]]|Did not enter|Did not enter|Did not enter|'''Heat, Round 1'''|Entered with [[Crank-E]]}}
 ''NOTE: This refers to the performance record of Robin Herrick alone''
+==Outside Robot Wars==
+In-between building Pussycat and Kill-E-Crank-E, Robin Herrick built a variety of robots, including a hydraulic petrol-powered walker with a large hammer. However, none of these robots competed at robotic events due to his relocation to Scotland, and the cancellation of the TV show.
 ==Robot Wars Live Events==
@@ Line 62: / Line 79: @@
 Kill-E-Crank-E entered a four-way melee against [[Crushtacean]], [[Meggamouse]] and [[Chimera]]. In the opening moments of the battle, the thin Kill-E-Crank-E was a perfect fit for Crushtacean’s own pincers, and was grabbed and dragged around for a period of the match. When freed by Crushtacean, Kill-E-Crank-E headed straight for the pit, getting caught over the edge. Chimera, in an attempt to finish off Kill-E-Crank-E, drove into the pit itself and freed the stranded machine, but Kill-E-Crank-E broke down shortly afterwards when a cable came loose.
+==Trivia==
-==Outside Robot Wars==
+*Kill-E-Crank-E was one of only four robots in Series 8 to not use modern lithium polymer or nickel metal hydride batteries inside the machine, the others being [[DisConstructor]], [[Sweeney Todd]] and [[The General]], which also used lead acid batteries.
-In-between building Pussycat and Kill-E-Crank-E, Robin Herrick built a variety of robots, including a hydraulic petrol-powered walker with a large hammer. However, none of these robots competed at robotic events due to his relocation to Scotland, and the cancellation of the TV show.
+==References==
+<references/>
 ==External Links==
-*[http://www.rr2h.uk/#!robot-wars/b1tv1 Article on Robin Herrick's experience with Robot Wars, on his company website rr2h]
+*[https://web.archive.org/web/20180426183639/http://www.rr2h.uk/robot-wars Article on Robin Herrick's experience with ''Robot Wars'' (archived)]
 *[http://www.robotwars.tv/competitors/season-8/week-1/kill-e-crank-e/ Kill-E-Crank-E on the ''Robot Wars'' website]
@@ Line 72: / Line 92: @@
 [[Category:UK Series competitors]]
 [[Category:Robots from Scotland]]
-[[Category:Robots with Vertical Flywheels]]
 [[Category:Axlebots]]
 [[Category:Invertible Robots]]
 [[Category:Competitors in Robot Wars Live Events]]
-[[Category:Robots which are still competing today]]
-[[Category:One-time Losers]]
 [[Category:Robots which debuted in Series 8]]
 [[Category:Robots which only fought in Series 8]]
+[[Category:Robots from Highland]]
+[[Category:Robots which lost their only battle]]
+[[Category:Robots with Cutting Discs]]
+[[Category:Robots with cameo appearances in Series 9]]