Project One was a robot that competed in the first series of Dutch Robot Wars. It featured somewhat of a wire-frame chassis that offered minimal protection to its vital components. It was very similar to the famous UK competitor Mortis, not only because of its appearance and armament, but because a great deal of money and engineering had gone into it. Also just like with Mortis, many people had high expectations for this robot, expectations upon which it ultimately failed to deliver. The basic premisse of this minimalist armoring. Armor doesn't fight, so the less armor ,the more fight.

The main reason for the failure is simple, 6 hours before the machine was loaded in the lorry provided by BNN the last bits were welded on, drilled out or otherwise being build. Untested except in the most basic fashion. During the tech check, done by George Francis, the starter motor that did the drive was madly spinning up, making a loud howling sound got the comment "It's an arena, not a runway".

The Team

Project One was built and entered by Team Mad Science, which was made up of Dutch roboteer WJ Dijkstra and his Belgian teammates Greg Cathalina, Mario "Maddox" de Jongh and Babeth van Son (who did not appear on TV because of the three team members limit). After Dutch Series 1, the team split into two for Dutch Series 2. Team captain WJ worked on his own to build Gravity and Elevation, which was one third of the clusterbot √3, while Maddox and Babeth formed Team Warlocks which built Project One's sequel robot Project Two: Hex'em. Maddox was also a team member of both Tough As Nails and Scraptosaur at various stages and is now a member of Team RCC along with Babeth, who was also a team member of Flextreme.

Robot History

Dutch Series 1

"The big guy with the beard (Maddox) pointed out a pneumatic valve which if hit would disable the robot, but it was so well protected we would never be able to reach it."
— Karl Jones of Blue, incorrectly predicting the outcome of their match with Project One.

Both robots started sluggishly, with Blue tapping the rear of Project One with its ineffective spinning disc. Project One's axe, and later its lifting arm landed on Blue, failing to cause any damage. Finally, after repeated blows Project One's axe caused superficial damage to Blue armour then ripped off the entire right hand side protection of Blue. However, Project One at this point broke down completely and was counted out.

It was unable to restore its position in the main competition when it lost to Enderbot in the loser's melee.

Problems of the 2 televisioned fights. The sluggish movement in the first fight was due the fact the speedcontroller was set at 50 amperes, not 150 amperes, making the startermotor almost powerless. The total break down was because the huge anderson link, used as removable link fell out. In itself strange as gaffatape should have been applied to reduce that possibility, alas, the robot was not powered up by the team members, but somebody from the arena crew.

For the second fight, the speedcontroler was removed, unleashing the full potential of the heavely reworked, overvolted starter motor. Unfortunatly, the 3kw+ motor did prove to much for the gearing of the steering, stripping the teeth from the nylon gear locking the wheel into a 30° angled position. After showering the arena crew with splinters from the wooden floor it could get in the arena, and after a few moments Sir Killalot came out to play. Project One ended up between claw and lance and played havoc with the axe on Killalots mask and brestplate.

After the Dutch Series One the axe was removed, armor improved and the pneumatics for the lifter adapted. The only outing for this Project One mod I was the Dutch event In Zwolle, december 2001. The frame still excists and resides with the frame of Project Two:Hex'em in the catacombs of Castle Black. Further parts distribution. The Huge ram for the lifter was passed to the guys from Shapeshifter and ended up in Dozer. The drive motor was mated to an hydraulic pump bij Kos, and that went into Scarab.


Series 2
Dutch Championship
Heat, Round 1
Heat C, Round 1 vs. Blue Lost
Heat C, Loser's Melee vs. Enderbot, Flextreme Lost


  • Wins: 0
  • Losses: 2

Dutch Series Record

UK Series Record

  • Series 1-6: Did not enter
  • Series 7: Entered with Gravity
Community content is available under CC-BY-SA unless otherwise noted.