Robot Wars Wiki
Robot Wars Wiki
Line 8: Line 8:
 
==Competing Robots==
 
==Competing Robots==
 
===Newcomers===
 
===Newcomers===
[[Spin Doctor (Series 2)|Spin Doctor]]<br /> From Huddersfield
+
[[ORAC]]<br /> From Bicester in Oxfordshire
*Team Members: Peter Duncanson, Phillip Duncanson, Martin Griffin
+
*Team Members: Peter Reynolds, Barry Davis, Jason Wright
*Weight: 66.6kg
+
*Weight: 55.3kg
*Dimensions: 155 x 120 x 40cm
+
*Dimensions: 165 x 80 x 60cm
*Speed: 17mph
+
*Speed: 10mph
 
*Turning circle: Zero
 
*Turning circle: Zero
*Ground Clearance: 20mm
+
*Ground Clearance: 70mm
*Power: 1 x 12V battery
+
*Power: 2 x 12v batteries
*Weapons: 20 Inch chainsaw, front snowplough, maces
+
*Weapons: 9 Inch circular cutting disc and front chisels
 
*Notes: Took 5 months to build and cost about £400
*Notes: Polypropylene shell coated in zinc
 
   
 
[[Pain]]<br /> From Norwich
 
[[Pain]]<br /> From Norwich
Line 29: Line 29:
 
*Weapons: Kinetic stabber driven by oxygen piston
 
*Weapons: Kinetic stabber driven by oxygen piston
 
*Notes: Materials aquired from uncle's farm and scrapyards
 
*Notes: Materials aquired from uncle's farm and scrapyards
 
[[Technophobic]]<br /> From Bournemouth
 
*Team Members: Mark Green, Mike Halon, David Hayward
 
*Weight: 82.2kg
 
*Dimensions: 140 x 75 x 55cm
 
*Speed: 10mph
 
*Turning circle: Zero
 
*Ground Clearance: 6mm
 
*Power: Petrol driven lawnmower engine
 
*Weapons: 9' steel cutting disc and blades
 
*Notes: Took 20 days to build and cost £800-£1000
 
   
 
[[Schumey]]<br /> From Darwen in Lancashire
 
[[Schumey]]<br /> From Darwen in Lancashire
Line 52: Line 41:
 
*Notes: Named after Michael Schumacher
 
*Notes: Named after Michael Schumacher
   
[[ORAC]]<br /> From Bicester in Oxfordshire
+
[[Spin Doctor (Series 2)|Spin Doctor]]<br /> From Huddersfield
*Team Members: Peter Reynolds, Barry Davis, Jason Wright
+
*Team Members: Peter Duncanson, Phillip Duncanson, Martin Griffin
*Weight: 55.3kg
+
*Weight: 66.6kg
*Dimensions: 165 x 80 x 60cm
+
*Dimensions: 155 x 120 x 40cm
 
*Speed: 17mph
 
*Turning circle: Zero
 
*Ground Clearance: 20mm
  +
*Power: 1 x 12V battery
  +
*Weapons: 20 Inch chainsaw, front snowplough, maces
 
*Notes: Polypropylene shell coated in zinc
  +
 
[[Technophobic]]<br /> From Bournemouth
 
*Team Members: Mark Green, Mike Halon, David Hayward
 
*Weight: 82.2kg
 
*Dimensions: 140 x 75 x 55cm
 
*Speed: 10mph
 
*Speed: 10mph
 
*Turning circle: Zero
 
*Turning circle: Zero
*Ground Clearance: 70mm
+
*Ground Clearance: 6mm
*Power: 2 x 12v batteries
+
*Power: Petrol driven lawnmower engine
*Weapons: 9 Inch circular cutting disc and front chisels
+
*Weapons: 9' steel cutting disc and blades
*Notes: Took 5 months to build and cost about £400
+
*Notes: Took 20 days to build and cost £800-£1000
   
 
===Veterans===
 
===Veterans===

Revision as of 15:51, 29 August 2011

The Second Wars - Heat E was one of 12 heats to determine the semi-finalists of Robot Wars: The Second Wars

  • Heat E featured Spin Doctor, the original thwackbot, and its famous Trial run, in which it destroyed Matilda's tusk.
  • Pain became the first robot to withdraw from competition and never make it into the arena because of electronics malfunctions.
  • Heat E also featured the fourth seed and only veteran in the heat, Killertron, who became the winner of the heat.
  • This was the first time a robot was pushed into the Pit of Oblivion.

Competing Robots

Newcomers

ORAC
From Bicester in Oxfordshire

  • Team Members: Peter Reynolds, Barry Davis, Jason Wright
  • Weight: 55.3kg
  • Dimensions: 165 x 80 x 60cm
  • Speed: 10mph
  • Turning circle: Zero
  • Ground Clearance: 70mm
  • Power: 2 x 12v batteries
  • Weapons: 9 Inch circular cutting disc and front chisels
  • Notes: Took 5 months to build and cost about £400

Pain
From Norwich

  • Team Members: Jon Witte, Pete Birch
  • Weight: 80.9kg
  • Dimensions: 130 x 70 x 45cm
  • Speed: 4mph
  • Turning circle: Zero
  • Ground Clearance: 0mm
  • Power: 2 x 12V batteries
  • Weapons: Kinetic stabber driven by oxygen piston
  • Notes: Materials aquired from uncle's farm and scrapyards

Schumey
From Darwen in Lancashire

  • Team Members: John Pocock, John Turnball
  • Weight: 79.3kg
  • Dimensions: 95 x 77 x 30cm
  • Speed: 30mph
  • Turning circle: Zero
  • Ground Clearance: 50mm
  • Power: 2 x 12V batteries
  • Weapons: Spikes
  • Notes: Named after Michael Schumacher

Spin Doctor
From Huddersfield

  • Team Members: Peter Duncanson, Phillip Duncanson, Martin Griffin
  • Weight: 66.6kg
  • Dimensions: 155 x 120 x 40cm
  • Speed: 17mph
  • Turning circle: Zero
  • Ground Clearance: 20mm
  • Power: 1 x 12V battery
  • Weapons: 20 Inch chainsaw, front snowplough, maces
  • Notes: Polypropylene shell coated in zinc

Technophobic
From Bournemouth

  • Team Members: Mark Green, Mike Halon, David Hayward
  • Weight: 82.2kg
  • Dimensions: 140 x 75 x 55cm
  • Speed: 10mph
  • Turning circle: Zero
  • Ground Clearance: 6mm
  • Power: Petrol driven lawnmower engine
  • Weapons: 9' steel cutting disc and blades
  • Notes: Took 20 days to build and cost £800-£1000

Veterans

Killertron (Seeded 4th)
From Bromley in Kent

Killertron 2

Killertron, winner of heat E

  • Team Members: Richard Broad, Abdul Degia, Ian Degia
  • Weight: 75kg
  • Dimensions: 145 x 70 x 60cm
  • Speed: 15mph
  • Turning circle: Zero
  • Ground Clearance: 100mm
  • Power: 2 x 12V batteries
  • Weapons: Pickaxe
  • Notes: A veteran of first Robot Wars - but no longer tickled pink!

Gauntlet

Configuration

  • Left route- Sir Killalot, and two pits
  • Centre route- See-saw and Shunt
  • Right route- Ramrig, Pendulum, flame pit and Dead Metal

Competitor runs

File:Schumeyramp.gif

Schumey, stranded on the ramp

File:Spindoctorkillalot.gif

Spin Doctor is rammed into the circular saws by Sir Killalot

1. ORAC - Completed - ORAC's high ground clearance gave it an advantage in taking the central route. Despite a bit of wheel-slip on the see-saw, it made it over, before pulling off a quick turn away from Shunt, allowing it to reach the endzone.

2. Technophobic - 11.3m - Technophobic headed straight for the see-saw getting caught on the spikes briefly, but escaped and continued up the ramp, straight into the claws of Dead Metal. However, the house robot's cutting disc wasn't working, so Shunt came in and began to hammer through Technophobic's armour. As the house robots backed up, Technophobic had one last run, but it was blocked by Dead Metal again.

Killertron gauntlet run

Killertron attacks Shunt

3. Killertron - 10.3m - Killertron made it up onto the see-saw, but halfway across, it turned and drove off the side. Although it escaped, Shunt was blocking the path, so Killertron started attacking Shunt with its axe, causing quite a bit of damage.While Shunt and Killertron were exchanging blows Dead Metal began to cut through the orange wheelie bin lid. When cease was called Killertron had moved no further.

4. Schumey - 7.3m - Schumey's top speed of 30mph appeared to be its biggest asset, but it was also its downfall. It charged straight at the see-saw and its lack of real control meant that it fell right off. It remained stuck until Sir Killalot came in from behind, picked it up and turned it over.

5. Spin Doctor - 3.8m - Spin Doctor's biggest problem was its size (in fact, it was unable to actually fit in the starting grid and had to be placed just outside). Although it contemplated going for Sir Killalot's route, it went for the ram rig instead. Unable to fit down that route it was then wedged onto the spikes by Sir Killalot. Spin Doctor was eventually freed and made a dash for the end of the ramrig but only made a few more metres before cease was called.

6. Pain - Retired - Before the run had even started, Pain's electronics died and the team called for a restart. The team quickly fixed Pain up with some spare electronics so that it would be able to drive (thus losing the spike weapon), but on the second attempt, it became clear that the changes hadn't worked, as Pain still would not move. Despite several attempts to get it fixed, the team could not get Pain working again and had to drop out.

"We've lost all the electrics"
— The Pain team explain why they were forced to retire their robot.

Eliminated: Pain

Trial (King of the Castle)

Spin Doctor rips off Matilda's tusk.

Spin Doctor breaks off Matilda's tusks.

Shuntkamikazi

Shunt commits suicide during ORAC's Trial

File:Matildatechfallen.gif

Matilda and Technophobic after the latter's Trial

1. Spin Doctor - Survived - Spin Doctor begun spinning on the spot as Matilda and Shunt closed in. This left the house robots momentarily stumped . Shunt promptly steered itself off the ring at which point Matilda charged at Spin Doctor. This proved a mistake as Matilda's tusks came into contact with the spinning robot, one was torn off. As time ran out Matilda tried, and failed, to back into Spin Doctor and push it off.

"Matilda's lost a tusk! She's toothless!"
— Jonathan Pearce.

2. Killertron - Survived - This was the first run and Killertron faced Shunt and Dead Metal who was substituted for Matilda after this run. Shunt had difficulty getting off its ramp but when it did finally get into the ring it began to pierce Killertron's armour. Killertron held off the house robots until in the dying seconds when it was pushed towards the edge. It looked like Killertron was going to be forced off the ring but it hooked onto one of Dead Metals spikes with its axe, preventing it from falling.

3. Technophobic - 35.95s - Technophobic went straight for Matilda, whilst Shunt nearly fell off again. As Technophobic was attacking Matilda Shunt came in and nearly pushed it off the ring. Matilda lifted up Technophobic, but just couldn't finish it off. The house robots then combined to shove Technophobic over the edge, but in the end dragged Matilda with it.

4. ORAC - 28.95s - Shunt had difficulty in getting onto the ring again but this time it fell off the ramp, leaving ORAC with only Matilda to contest against. Matilda exploited ORAC's high ground clearance, lifting it and spinning it around, before pushing it off.

5. Schumey - 9.40s - Once again it was Schumey's speed which proved its undoing. It drove straight into Shunt, which left it very near the edge. As Matilda closed in on Schumey, it tried to escape and in doing so drove off the ring.

Eliminated: Schumey

Arena

Semi-Finals

Killertron (4) vs ORAC

Killertron vs Orac

Killertron axes Orac

ORAC used its chisels initially to keep Killertron at a distance where it couldn't hit ORAC with its axe but ORAC drove over the spikes and its drive chain came off. Killertron launched some vicious attacks at ORAC, puncturing the body of the yellow robot. Killertron then dragged Orac over the flame pit, where it caused further damage to the now very hot armour.

"Up in smoke, the hopes and dreams"
— Jonathan Pearce as ORAC burns on the flames.

Winner: Killertron

Spin Doctor vs Technophobic

Technophobic vs Spin Doctor

Technophobic and Spin Doctor clash

The Spin Doctor team had added flails to the robot so that when it spun it would cause damage. It seemed to be gaining the upper hand against Technophobic which couldn't seem to find an effective form of attack on Spin Doctor. Most of the battle was Technophobic trying to find a way to damage Spin Doctor. Spin Doctor suddenly stopped moving, soon after flames appeared inside Technophobic, but cease was called before long.

Winner: Technophobic

Final

Killertron (4) vs. Technophobic

Killertron vs Technophobic

Killertron pushes Technophobic into the pit

Killertron had the edge on weaponry but Technophobic managed to get out of the way of each blow, almost driving straight into Dead Metals pincers. Killertron then used its pickaxe to push Technophobic back into the pit.

"I hope it's not claustrophobic, or arachnophobic, there are spiders down there! It's dark, It's gloomy, and you're going down!"
— Jonathon Pearce as Technophobic is pitted.

Winner: Killertron