Robot Wars Wiki
Robot Wars Wiki
No edit summary
Tag: sourceedit
(Added 'Design' section.)
Tag: sourceedit
Line 13: Line 13:
 
}}
 
}}
 
{{quote|Will this plumb the depths or torpedo the rest?|Jonathan Pearce}}
 
{{quote|Will this plumb the depths or torpedo the rest?|Jonathan Pearce}}
'''Sub-Version''' was a robot that resembled a submarine and armed with a spinning disc and pneumatic cylinder spikes. It was entered by the Submarine Service in the [[Robot Wars Extreme: Series 1/Forces Special|Forces Special]] of [[Robot Wars Extreme: Series 1]] to celebrate the centenary of the Submarine Service. It reached the second round, where it lost to [[Mega-Hurts]]. Due to the robot's shape, it could self right with a periscope acting as a srimech. The robot, renamed as '''Sub-Version 1.1''', also fought in [[Robot Wars: The Seventh Wars|The Seventh Wars]], but it was eliminated in round 1 of its heat, being pitted by [[Trax]] 2 seconds before the fight ended. It had previously attempted to qualify for Series 5, but lost to [[Corkscrew]] in the qualifiers.<ref>[http://web.archive.org/web/20040804235852/http://www.robotwars.tv/~Teamcorkscrew/page7.html]</ref>
+
'''Sub-Version''' was a robot that was first entered by the Submarine Service in the [[Robot Wars Extreme: Series 1/Forces Special|Forces Special]] of [[Robot Wars Extreme: Series 1]] to celebrate the centenary of the Submarine Service. It reached the second round of the Forces Special, where it lost to [[Mega-Hurts]]. An improved version of Sub-Version, known as '''Sub-Version 1.1''', also fought in [[Robot Wars: The Seventh Wars|The Seventh Wars]], but it was eliminated in the first round after being pitted by [[Trax]] seconds before the fight ended.
   
  +
Sub-Version had also attempted to qualify for Series 5, but lost to [[Corkscrew]] in the qualifiers.<ref>[http://web.archive.org/web/20040804235852/http://www.robotwars.tv/~Teamcorkscrew/page7.html]</ref>
During its Extreme 1 introduction, Sub-Version was "shown" rising from the water. However, this was actually a mock-up of Sub-Version, not the actual robot.
 
  +
  +
==Design==
 
[[File:Subversionextreme.jpg|thumb|left|Sub-Version in Extreme 1]]
  +
Sub-Version was a black robot designed to resemble a submarine, complete with a periscope that acted as a self-righting mechanism and a crow's nest complete with a uniformed Action Man figure resting inside. Its weapons were a pair of pneumatic spikes at the front and a small cutting disc at the rear.
   
 
==Robot History==
 
==Robot History==
 
===Extreme 1===
 
===Extreme 1===
[[File:Subversionextreme.jpg|thumb|left|Sub-Version in Extreme 1]]
 
 
Sub-Version fought in the Forces Special. Its first match was against Anvil of the R.A.F. and [[Shockwave (Extreme 1)|Shockwave]] of the Police. It didn't have to do much here, because Shockwave drove straight down the pit. In its next battle, Sub-Version faced Mega-Hurts of the Navy. The two robots attacked each other, Mega-Hurts being the quicker, but in the early stages, Sub-Version being the aggressor. It used its disc to attack Mega-Hurts, but the spikes didn't work. After a while, Sub-Version broke down and was pitted, but not before the captain doll was axed out of the crow's nest by Shunt.
 
Sub-Version fought in the Forces Special. Its first match was against Anvil of the R.A.F. and [[Shockwave (Extreme 1)|Shockwave]] of the Police. It didn't have to do much here, because Shockwave drove straight down the pit. In its next battle, Sub-Version faced Mega-Hurts of the Navy. The two robots attacked each other, Mega-Hurts being the quicker, but in the early stages, Sub-Version being the aggressor. It used its disc to attack Mega-Hurts, but the spikes didn't work. After a while, Sub-Version broke down and was pitted, but not before the captain doll was axed out of the crow's nest by Shunt.
   
 
===Series 7===
 
===Series 7===
The robot returned for Series 7, now improved and called Sub-Version 1.1. Its first battle was against veterans The Steel Avenger, previous competitors Shredder Evolution, and newcomers Trax. Sub-Version started by taking a piggy-back over Trax, before being hit by Shredder Evolution. It then retaliated towards the spinner, but it was able to avoid Sub-Version. The two robots clashed again, being separated by The Steel Avenger. Trax then got under Sub-Version, drove it to the arena wall, and nearly flipped it out. Sub-Version nearly made the mistake of driving into the pit after opening it. It then drove onto the flame pit to attack Trax. With just 2 seconds remaining, the tracked robot pitted Sub-Version.
+
Sub-Version 1.1 made its main UK series debut in Series 7. Its first battle was against veterans The Steel Avenger, previous competitors Shredder Evolution, and newcomers Trax. Sub-Version 1.1 started by taking a piggy-back over Trax, before being hit by Shredder Evolution. It then retaliated towards the spinner, but it was able to avoid Sub-Version 1.1. The two robots clashed again, being separated by The Steel Avenger. Trax then got under Sub-Version 1.1, drove it to the arena wall, and nearly flipped it out. Sub-Version 1.1 nearly made the mistake of driving into the pit after opening it. It then drove onto the flame pit to attack Trax. With just two seconds remaining, Trax pitted Sub-Version 1.1, eliminating it.
   
 
==Results==
 
==Results==
Line 37: Line 40:
 
{{Battle|[[Robot Wars: The Seventh Wars/Heat I|Heat I]], Round 1|[[The Steel Avenger]], [[Trax]], [[Shredder|Shredder Evolution]]|Eliminated}}
 
{{Battle|[[Robot Wars: The Seventh Wars/Heat I|Heat I]], Round 1|[[The Steel Avenger]], [[Trax]], [[Shredder|Shredder Evolution]]|Eliminated}}
 
|}
 
|}
[[File:Subversioninwater.jpg|thumb|Sub-Version goes amphibious]]
 
   
 
===Wins/Losses===
 
===Wins/Losses===
Line 51: Line 53:
   
 
==Trivia==
 
==Trivia==
 
[[File:Subversioninwater.jpg|thumb|Sub-Version goes amphibious]]
 
*Sub-Version is one of only nine robots to debut in Extreme 1 and to fight in one of the main competitions. The others were [[3 Stegs to Heaven]], [[Axe-Awe]], [[Comengetorix]], [[Fighting Torque]], [[Fluffy]], [[NEAT Machine]], [[Spawn Again]] and [[The Executioner]].
 
*Sub-Version is one of only nine robots to debut in Extreme 1 and to fight in one of the main competitions. The others were [[3 Stegs to Heaven]], [[Axe-Awe]], [[Comengetorix]], [[Fighting Torque]], [[Fluffy]], [[NEAT Machine]], [[Spawn Again]] and [[The Executioner]].
 
**Of these, Sub-Version (1.1) waited the longest between its debut and main competition appearance.
 
**Of these, Sub-Version (1.1) waited the longest between its debut and main competition appearance.
 
*[[Barber-Ous|Barber-Ous 2'n a Bit]], Sub-Version 1.1, [[Malc 1.5]], [[Iron-Awe|Iron-Awe 2.1]] and [[Judge Shred|Judge Shred 2½]] are the only robots to name a robot part sequentially.
 
*[[Barber-Ous|Barber-Ous 2'n a Bit]], Sub-Version 1.1, [[Malc 1.5]], [[Iron-Awe|Iron-Awe 2.1]] and [[Judge Shred|Judge Shred 2½]] are the only robots to name a robot part sequentially.
 
*During its Extreme 1 introduction, Sub-Version was "shown" rising from the water. However, this was actually a mock-up of Sub-Version, not the actual robot.
   
 
==References==
 
==References==

Revision as of 17:41, 23 August 2016

"Will this plumb the depths or torpedo the rest?"
— Jonathan Pearce

Sub-Version was a robot that was first entered by the Submarine Service in the Forces Special of Robot Wars Extreme: Series 1 to celebrate the centenary of the Submarine Service. It reached the second round of the Forces Special, where it lost to Mega-Hurts. An improved version of Sub-Version, known as Sub-Version 1.1, also fought in The Seventh Wars, but it was eliminated in the first round after being pitted by Trax seconds before the fight ended.

Sub-Version had also attempted to qualify for Series 5, but lost to Corkscrew in the qualifiers.[1]

Design

Subversionextreme

Sub-Version in Extreme 1

Sub-Version was a black robot designed to resemble a submarine, complete with a periscope that acted as a self-righting mechanism and a crow's nest complete with a uniformed Action Man figure resting inside. Its weapons were a pair of pneumatic spikes at the front and a small cutting disc at the rear.

Robot History

Extreme 1

Sub-Version fought in the Forces Special. Its first match was against Anvil of the R.A.F. and Shockwave of the Police. It didn't have to do much here, because Shockwave drove straight down the pit. In its next battle, Sub-Version faced Mega-Hurts of the Navy. The two robots attacked each other, Mega-Hurts being the quicker, but in the early stages, Sub-Version being the aggressor. It used its disc to attack Mega-Hurts, but the spikes didn't work. After a while, Sub-Version broke down and was pitted, but not before the captain doll was axed out of the crow's nest by Shunt.

Series 7

Sub-Version 1.1 made its main UK series debut in Series 7. Its first battle was against veterans The Steel Avenger, previous competitors Shredder Evolution, and newcomers Trax. Sub-Version 1.1 started by taking a piggy-back over Trax, before being hit by Shredder Evolution. It then retaliated towards the spinner, but it was able to avoid Sub-Version 1.1. The two robots clashed again, being separated by The Steel Avenger. Trax then got under Sub-Version 1.1, drove it to the arena wall, and nearly flipped it out. Sub-Version 1.1 nearly made the mistake of driving into the pit after opening it. It then drove onto the flame pit to attack Trax. With just two seconds remaining, Trax pitted Sub-Version 1.1, eliminating it.

Results

SUB-VERSION - RESULTS
Extreme Series 1
Forces Special
Round 2
Round 1 vs. Shockwave, Anvil Qualified
Round 2 vs. Mega-Hurts Lost
SUB-VERSION 1.1 - RESULTS
Series 7
The Seventh Wars - UK Championship
Heat, Round 1
Heat I, Round 1 vs. The Steel Avenger, Trax, Shredder Evolution Eliminated

Wins/Losses

  • Wins: 1
  • Losses: 2

Series Record

  • Series 1-4: Did not enter
  • Series 5: Failed to qualify
  • Series 6: Did not enter
  • Series 7: Heat, Round 1
  • 2016 Series: Did not enter

Trivia

Subversioninwater

Sub-Version goes amphibious

References